When designing games sometimes you have an idea that you flesh out and after a while you decide that the idea is not right for this particular game. The worst thing you can do in this situation is scrap the idea completely and never look back at it, sometimes the best designs come from ideas that you didn’t like initially. This recently happened to me when I was working on level designs for Space Dunk. One of my first ideas was a diamond shaped arena. The initial idea did not test well at QA, players were having a lot of trouble figuring out where to go. The level was taken out of the game but recently I revisited it and came up with two different levels based on my initial design.
What to think about when revisiting concepts:
The first two things I like to consider when revisiting an old concept are: what was my original goal for this level and what part of the original idea did not work. I like to think about my goal for the level when revisiting it because it allows me to remember why I made the design choices I did the first time I was designing the level. This also allows you to think about better ways to achieve the same goal and it also allows you to reconsider the goal of your level and possibly change it. When you look at why a level did not work its important to look at it objectively, its easy to say a level didn’t work because it was a bad design but its much harder to look at the specifics of why it didn’t work. When I looked back at my diamond level I realized that one problem was that it was just too big, by making the level smaller it helped the players navigate the space better. The other major problem with the level that I discovered was that it was too cluttered so the players could not see the other teams goals easily. Since the goal of the game is to score in the other teams goal not being able to see the objective caused players to feel lost.
The first thing I do when making changes to a level concept I am revisiting is save a new copy of the level, that way I still have the old version before I start making changes. When I was making changes to the diamond Space Dunk level one thing I did was scale the level down to help with navigation. I also rotated the entire arena and removed most of the objects out of the middle so both teams could see the goals at all times. This allowed me to drastically change the level pretty quickly and get it ready for testing again. The only was to find out if the changes you make are for the better is to test them.
Looking at old concepts is a good way to inspire yourself but it is important to remember that not every idea you have is going to be salvageable, this does not mean that you can’t learn from the concept. The first few levels I ever designed and created were really terrible but I learned a lot from making them and I learned a lot more from revisiting them and playing them. When you return to an old project or concept and you have distanced yourself from the feelings you had towards it when you were first making it you have the potential to learn a lot from the mistakes and the successes from your past.
I have been working on creating sounds for Space Dunk recently, when designing sound for a game you have to make sounds for every interaction the player will encounter. Sounds are one of the ways that players receive feedback from the game, and good feedback can be the difference between a average game and an amazing game. Feedback does not only have to be visual, sounds can also be used to provide the player with feedback as long as you don’t throw too many sounds at the player at once.
Examples of Excellent Sound Feedback:
There have been several games with great sound design recently one of the best examples is Alien Isolation. This horror game uses sound to help raise the tension of being chased through a spaceship by an alien. The game relies on the sound to help set the mood of being hunted without the game having to show you the monster. The Halo series is another example of games with phenomenal sound design. The weapons that the enemies use against you all have very unique sounds so the player can tell what weapons the enemies are using without even seeing the enemies, this is also true for the enemy types the player can tell what enemies are around based on their dialog. When the player is in critical health a very subtle beeping sound warns the player that they can’t take much more damage, this sound is not too loud so that the player can hear all the other important sounds. This is one of the hardest parts of sound deign, making sure that the sounds don’t overpower each other. In any game there are certain sounds you want the player to hear every time however, you don’t want other feedback sounds to get drowned out. If a sound you are using to give the player feedback can’t be heard then the player is not getting the feedback they need.
Space Dunk Audio Feedback:
While working on the auditory feedback for Space Dunk I have been using QA testing to find out if any of my sounds are too loud or too soft. The first time I created a sound for the ball being thrown it was so quiet that if there was any other sound being played when a ball was thrown the players could not hear the throw sound. This is one of the first projects I have worked on where the sound wasn’t designed as an afterthought this has allowed me to get feedback on the sounds from QA and this has resulted in sounds that work together much better.
One of the biggest challenges in level design is create an environment that is easy for the player to navigate. When creating a level you know what the layout is so it can be very easy to think that a level is easy to navigate but when it goes to testing players get lost easily. This not only shows the importance of QA testing it also presents the question: How does one lead a player through a level? There are several ways to give a player hints about where to go in a level without blatantly telling them such as: lighting, enemy placement, and items. Now lets explore each of these ways to lead the player through a level.
Lighting is important in any game, lighting can be used to generate a certain mood and it can be used to aid in player navigation. Horror games often use lighting to build mood and also lead player through an area. The eye is naturally drawn to lights and when a player is in a dark area they will move toward a lit area. A great example of this is in the Half-life 2 level Ravenholm. This area is a horror themed level where the player has to fight through a zombie infested town.
Half-life 2 Ravenholm- The player first meets Father Grigori
The picture above shows the first time the player meets Father Grigori, a survivor who helps the player through the town. The player is drawn to this area due to the huge bright fire in front of the building. Above the fire there is a very bright light coming out of the open door where Father Grigori appears. This is intended to draw the players eye to where Grigori shows up, this is important because the level designer uses this scene to teach the player that there are traps in the town that the player can use against the zombies.
The placement of enemies can be used to guide players as well, however since the enemies are going to move towards the player this method does not always work. An amazing example of this being used well is also in Ravenholm. Immediately after the player meets Father Grigori (shown in the picture above) the player walks past a boarded up room. As the player walks by two zombies start breaking through the boards and attacking the player. This draws the player to the room where the zombies just came from, and in that room the game teaches the player that they can turn on gas in certain areas to create fire. This is important later in the level, when the player has to turn off some gas to move on.
The placement of items in a level can help lead a player through an environment. A rule of thumb I use in games is that if I think I am getting turned around I start to scan the area of pick-ups, if an environment is picked clean I assume I have been there already. The Unreal Tournament series used very small heath pickups to show players different paths they can take through a level. Another example is in Bioshock, when the player acquires the shotgun. The weapon is placed in the middle of the room where the player can easily see it from the doorway. This causes the player to go into that room and get the weapon (although they are ambushed immediately after).
There are many different ways to give the players hints on how to navigate the level or area. There are many ways that I didn’t get to discuss such as sound effects and environment clues. The biggest problem with levels that are not fun to play is that they are frustrating to navigate. A great level shows the player where to go without directly telling them, an amazing level subtly tells the player where to go without them realizing it.
Last week I talked about symmetric level design so this week I decided to look at the other side of the coin. Asymmetric levels offer unique design challenges, the biggest pit fall is having one side of the map be more desirable then the other. This can be a big issue in a team based game type, if one team spawns on a side with better weapons or power-ups the balancing will be off and one team will have a much easier time winning. If an asymmetric level is balanced well it can be a very interesting experience for the player, since each side of the map is different the players must come up with different strategies depending on where they spawn.
Escalation – Gears of War 1
The map Escalation from Gears of War is an excellent example of fantastic asymmetric level design. The map takes place on a large stair case one team spawns at the bottom and has to work their way up the stairs, the other team spawns at the top of the stairs and works their way down. This map may seem unbalanced but Epic Games used weapon spawns and the geometry of the level to keep things balanced. The team that starts at the top (the Estate Spawn in the picture above) has the advantage of being able to see the surrounding area better as well as superior firing positions. Since Gears of War is about taking cover during combat the players at the top of the map have positions that allow them to shoot down at the other team allowing them to get around the attacking teams cover. Their elevated position also makes it hard for the team coming up the stairs to hit the opposing team. The team that is advancing up the stairs (the team that starts at the Allfather Spawn) is given two sniper rifles to help even the odds. The team moving up the stairs has almost all the weapons spawn close to them, this helps them fight against an enemy with a superior position. The sparsity of weapons is very intentional, besides the sniper rifles there are only three other weapon pick-ups two of which are pistols and the last is some grenades. This makes the sniper rifles very powerful on this map since there aren’t any weapons to counter the snipers. Gears of War’s multiplayer works on a round system, when everyone on a team is killed the round ends and the teams trade spawns. This makes it so both teams have opportunities to take advantage of the high ground and the snipers respectively.
Asymmetric maps can live and die based on the balancing, its very compelling as a player to have two different sides that require different strategies to attack and defend. The biggest challenge that one must overcome when designing a asymmetric level is making sure one side is not more overpowered then the other, if one side is clearly at an advantage nobody is going to want to start on that side which can lead to players quitting early.
There are many different types of levels in video games, two very popular types of multiplayer levels are Symmetric and Asymmetric. Both of these types of maps have advantages and disadvantages depending on what kind of experience you want your players to have. Symmetric maps are very common in team based objective game types (such as capture the flag) since neither side will have an advantage due to where they spawn. This post will explore symmetric maps and the ways they can be compelling.
Figure 1 Halo 3 – The Pit
The Halo 3 map The Pit is one of my personal favorite symmetric maps of all time, This map is a great example of why symmetric maps are so compelling. This level was used for both deathmatch and objective game modes and was widely considered one of the best maps in Halo 3. The areas that both teams spawn in (represented below by the red and blue boxes) offer the players three major routes for player to get to the opposing teams base, there are more ways to get across the map however but the examples I am going to talk about are the most direct.
Figure 2 The Pits Spawning Areas
The spawns offer more then just a base for the teams to start in, both teams have sniper rifles at the towers beside their spawns. This allows skilled players to quickly begin an offense play or a defense play. The areas in front of the sniper towers are very open however there are many safe ways to maneuver around snipers. Each side also has a shotgun that can be used to defend in the close quarters of the spawn area.
Figure 3 Routes
Figure 3 shows three of the many routes to get from one side of the map to the other. The purple path takes the player from the base past a sniper rifle, they then have two options: take the lower path witch is a long hallway with no cover or take the upper path which is a small square room. The hallway route is dangerous but also has a Overshield (a health power up), the hallway route is very quick and direct but it leaves the player exposed to a lot of enemy fire. The room route has very close quarters and also has an energy sword (one of the most powerful close quarters weapons in the game), this route offers more cover but it can be easily held down by one player with a close quarters weapon. The Green path shows the routes that bring the player through the center of the map. The center of the map has a rocket launcher in the middle of a hallway, this area is easy for both sides to see and is often the area where the first kill of the game happens. The other hallway next to the rocket launcher has an invisibility power up which is very useful in objective game types. The blue route is the quickest way to get to the other side of the map but it requires the player to run at the other teams sniper tower this is very dangerous and there is not much cover available. This route has a few weapons but no super powerful ones, this route is more about speed then getting equipment. The thing that these routes all have in common is the center of the map has weapons and power ups that the players will fight over. The best symmetric maps (in my opinion) create reasons for the players to fight in the center of the map.
When making levels for a game it is important to document your ideas, this way if your on a team everyone is on the same page and if your working by yourself you have something to work off of. A one page level design document can make the process of creating a level much easier. The methods that I am going to discuss have worked well for me but like anything in agile game development none of these rules are set in stone.
The first thing I like to do is make an illustration of the level this can be done in any program you prefer such as: Photoshop, Adobe Illustrator, or even Google Docs. If you have created a concept sketch digitizing that will make the process easier. It’s important to remember that if your level is 3D then you are making a 2D drawing to represent it, this can lead to confusion. In the cases where I have intricate 3D levels I like to have a top down drawing and a side drawing, this will help anyone else who sees the document understand the space. Once the drawing of the level is complete I like to draw arrows to the most important parts of the level and have boxes of text explaining any special mechanics that happen in those areas. If you document is for a single player level it is important to make a golden path. The golden path is the most ideal path a player can take to complete a level. Multiplayer levels do not have golden paths because where the player needs to go changes as the match progresses. The last thing you need once your drawing is complete is to make a key to show what certain symbols represent.
Another important thing you need to have in a level design document is a asset list, this is a list of every art and sound asset that the level will need to be completed. This is very helpful if you are working with artists and other designers. The list will also give you an idea about how long it will take to complete making the level.
Level design documentation is very important if you are working on a team but it can also help you if your working by yourself. When making a level design document remember that no matter how good of a level idea you have it does not matter if your document is not readable.
This week I started working on the sound design for Space Dunk, I am not in charge of making the music but rather all the sounds effects. The sound effects in a game give the players vital feedback that they can’t necessarily get from just visuals. The sounds in the game need to accompany each interaction however it is easy to add too many sound effects and then the player will be overwhelmed. The hardest part about sound design is finding the happy medium between too much sound and not enough sound. I started this process by making a list of all the sounds we need for the game. I separated the sound into three groups: Crowd Noise, Announcer Lines, and Game play Sounds. The crowd noise is cheering and chants that you would encounter at a sporting event, these noises are essential to help immerse the player. The Announcer sounds are also used to help immerse the player but it also gives the player feedback when someone scores a point. The sounds that give the players the most feedback are Game play sounds, these sounds are what is played when there is any interaction between players. Instead of finding samples to use I am planning on recording my voice and using synths to make all the sounds. Once all the sounds are recorded I will begin mastering them so that the volume levels on all the sounds are appropriate. Sound design is a lot like programming, it requires you to keep making tiny changes until something feels right. Sound is one of the most important aspects of a game, it gives the player feedback and also helps make the world you create feel more alive.
This week I have been working on creating as many concepts as possible for potential arenas for the game Space Dunk. This process is one of my favorite aspects of game design because it allows me to flex my creative muscles and create a compelling environment for the player to explore. I wanted to use this blog post to give some insight into my process and hopefully help someone else who is stuck in the concept stage.
When starting out a new level there are a lot of things to think about and this can get very overwhelming. The first thing I like to think about is: “What is this level teaching or emphasizing to the player” this gives me a jumping off point. When thinking about what the level is emphasizing to the player I don’t necessarily mean a set piece moment (although that can work too), but rather a primary game mechanic. One example of this in Space Dunk is a level concept I created that was made to emphasize passing the ball, passing is one of the primary mechanics in Space Dunk and by making a level centered around it I can help the players master this mechanic which will help them get better at the game. Once you have an idea about what you want your level to emphasize the next step is to begin sketching.
Drawing Your Level Concept:
I like to sketch out my ideas before I make a digital version, I find it easier to get all my ideas out. The most important thing I can tell you about drawing level design concepts is: do not be afraid to start over if an idea isn’t working out, that’s the beauty of sketching things out, its supposed to be quick and rough. However if you do end up starting over NEVER throw away your old design, even if you hate it. It always good to keep things around to inspire you later or just to remind yourself what NOT to do. It’s not important for the sketch to look nice, I am not very good at drawing but this step allows you to just put down as many ideas as possible as quickly as possible.
The last step is to show it to your group members to get feedback before you continue forward. If your working by yourself show it to someone who plays games. I have always found it useful to get a second pair of eyes to look at something, sometimes they notice something obvious that you have overlooked. Once you are happy with your level concept it is time to move on to making a Level Design Document and then blocking out the level.
This week I returned to Champlain College for my final semester, last semester I worked on a game that was cut and now I have joined a new team working on a game called Space Dunk. Space Dunk is a first person competitive multiplayer sports game that takes place in zero gravity arenas. The Space Dunk team asked me to join them to help them create more levels. During this first week we met and talked about what the teams goals for this semester are and what they wanted the new members to focus on. We discussed each of the mechanics that are already implemented and then talked about what mechanics we wanted to add this semester. I spent a lot of time this week doing research into different sports to help inspire my level design. The first thing I did was research real sports like Golf, Football, and Basketball, I wanted to know what made these games compelling. I honestly don’t watch sports but I have several friends that love professional sports and I talked extensively with them. I also looked at other sports games that are not realistic like: Rocket League, Unreal Tournament’s Bombing Run game mode, and Griff ball.
I started conceptualizing a bunch of different ideas I have, at this point in the development process I just wanted to create as many ideas as possible. I showed the list of all the level concepts to the team and had them tell me which ones they liked the best. Now that the list is narrowed down I am going to start sketching out a few different concepts and try to figure out what assets each level will need. The team is in constant communication at this point in the process and its really exciting to see the excitement that everyone has for this project.